page_banner

YCZ65-250C generator stator cooling water pump

Short Description:

YCZ65-250C stator cooling water pump is applied to the stator cooling water system, which is equipped with two parallel stator cooling water pumps, and the outlet of the pump is equipped with a check valve. During normal operation, one is in operation and one is standby. When the outlet pressure of the pump is lower than the set value or the flow of constant cooling water is lower than the set value, the standby pump shall be linked to maintain the normal operation of the system and alarm at the same time.


Product Detail

Characteristics of YCZ65-250C stator cooling water pump

The YCZ65-250C stator cooling water pump is horizontal, single-stage, single suction cantilever centrifugal pumps. The product complies with DIN24256 / ISO2858 standard. It is suitable for conveying clean or medium containing traces particles, neutral or corrosive, low temperature or high temperature.

The pumps are of closed impeller type, and the pressure acting on the shaft seal is balanced by the back blade or balance hole of the impeller.

The pump adopts "rear pull-out" structure. During maintenance, it is not necessary to disassemble the inlet and outlet pipelines or even the motor. The whole rotor components (impeller, shaft seal assembly, bearing support components, etc.) can be pulled out from the rear.

The pumps are of closed impeller type, and the pressure acting on the shaft seal is balanced by the back blade or balance hole of the impeller.

YCZ65-250C stator cooling water pump Maintenance

1. During the period of running, inspect the stationary nature of running of the pump unit, observe whether there is the phenomenon of vibration or not and take notice of the abnormal running noise. Under the condition of not knowing the reason of producing noise and trouble it firstly has to stop immediately, find out the reason and eliminate it.
2. Often inspect the connecting condition of the coupler, In order to avoid damage, if there occurs deformation, it should be eliminated immediately.
3. Inspect the auxiliary system during the period of operation.

YCZ65-250C stator cooling water pump spare parts

YCZ65-250C stator cooling water pump spare parts (1) YCZ65-250C stator cooling water pump spare parts (2) YCZ65-250C stator cooling water pump spare parts (3) YCZ65-250C stator cooling water pump spare parts (4)


  • Previous:
  • Next:

  • Write your message here and send it to us